When making marijuana pipes and bongs, it pays to get creative, all you have to do is think outside the box and recognize the materials that are widely available to you. A copper pipe is a great marijuana pipe that I’ve created myself and can made using just a couple of copper pipe fittings from Lowes or Home Depot or any other similar hardware stores. It should only cost you about $20 to make and you can pretty much make it any size you want it to be.
It’s been awhile since I’ve made my copper pipe so I’m not sure exacly what fittings and sizes I used. They have pipe fittings for nearly everything and of every size, I’m pretty sure the diameter of the pipe fittings were either 3/4″ or 1/2″.
To make the copper pipe all you gotta do is go to your local hardware store and check out the pipe fitting sections and do a little experimentation. Make sure your pipe fittings all have the same diameter so they can screw in. They have a perfect pipe fitting that makes a bowl as well as a mouth piece. The good things about pipe fittings is you can make it as large or small as you want, and if you’re out and about with your pipe you can simply unscrew the fittings stick it in a plastic baggie and all you got is some copper pipe fittings.
I’ve drawn a picture for you in MS Paint to help you better understand the design. This copper pipe design is a very effective pipe and was probably one of my most favorite for several months. Make sure you use some aluminum foil or metal mesh for a screen or else you’ll be eating most of your bud rather than smoking it.
Link to this page
